It happens to the best of us; you push the trigger on your glue gun, all ready for a fun arts and crafts project — then nothing comes out. So that is very annoying because you might need to complete something important. But don’t worry! Follow these easy tips and tricks to repair your glue gun in no time.
Your glue gun may not work correctly for many reasons. The glue stick is put in wrongly. Ensure you have the right glue stick that fits your gun. If you have the correct glue stick, verify it is fully loaded into your gun. If not, it will not work as expected.
Your glue gun might not work because it needs to heat up for a few minutes in order stir dispensing the glue. Glue guns are like ovens, they need some time to heat! So, if you just connected this, leave it to get warm and then try again. The idea is not to hurry, during this step.
Problems with the temperature: If you choose a low heat setting, it could take longer to melt and come out of conic than stiffer glues. Or, conversely, if it gets too hot then end of the glue stick will burn and leave a stinky smell. Therefore, it is imperative that you monitor the temperature of your glue gun.
Clogged nozzle: In the event that your glue is coming out like a dried toothpaste, it is possible for either dirt or may be blocked in the actual tip where you should find him doing all those work. Keep the nozzle clean so it is easy for glue to flow out. If it isn't, then the glue will not come out when you press the trigger.
I started off with a broken trigger^(the part of the glue gun that you push to make the glue come out). If this is what is broken in the trigger, then you will probably need to fix or have it repaired by someone who knows how. A broken trigger is enough to make it very difficult for you to use your glue gun.
Remove the gluestick carefully: Pull your glue stick gently out of the nozzle -- if you suspect that might be what's going on, try to remove it. You can also cut a small section of it to assist with pushing any clogged glue through the gun. This can also unblock whatever is in your way.
In the protections level test the foam sealing pads can be IP67 or even greater. And we also have a glue gun not dispensing glue. Kaiwei fully automatic foams sealing machines is equipped with three axes, eight servo motors, eight reducers and 4 meters pumps.
KW-900 hybrid head has Patents national inventions. No measurements of raw materials, and no pressure controls (no frequently measured raw material density because weather conditions throughout the years). The amounts of the size of glue spits, the systems screen parameters can be adjusted at any time, exact glue. The raw materials are not changed, the amounts of raw materials not altered, and the glue gun not dispensing glue shall be manually weighed prior to each use. No requirements to have a room with air conditioning.
Our company provides extensive after-sales on-site services as well as an glue gun not dispensing glue to improve the customer experience and ensure satisfaction. We'll bring personnel to site for equipment maintenance, training or troubleshooting in order to fix the issue quickly and in a timely way. It ensures that the customers' equipment can continue to function and produce in a normal manner.
It is not necessary to have a professional operating This glue gun not dispensing glue. It is easy to use. For newcomers, it is possible to start in less than 30 minutes.
- Privacy policy - Blog