The use of an industrial polyurethane foam spray machine is associated with the use of hazardous chemicals, high pressure systems and risk of fire. Making operators safe is not only a regulatory obligation, but it's a basic duty. With more than 20 years of experience in intelligent sealing and dispensing systems, KAIWEI Technology Group focuses on safety by providing detailed system specifications. The following are basic safety procedures for the use of polyurethane foam spray equipment.
1. Personal Protective Equipment (PPE) and Chemical Safety
The two components of the polyurethane system consists of isocyanates and polyols which may be skin sensitizing, respiratory irritants and allergens. All operators and personnel in spray area must wear adequate PPE.
Operators need to wear chemical resistant gloves (nitrile or butyl rubber), protective coveralls where skin exposure is not possible and safety goggles with side shield to help prevent splashes of chemicals. During spray applications a supplied-air respirator or a powered air-purifying respirator (PAPR) equipped with organic vapor cartridges must be worn for respiratory protection. It is important to monitor isocyanate vapors continuously in confined areas. KAIWEI have detailed PPE guidelines and training through our "Kai Yixue" mini-program and support services on-site to ensure that all operators are aware of and adhere to these important safety measures.
2. Ventilation and Fire Prevention
When vapors build up in the area, it can become flammable or explosive fumes from the operations of polyurethane spray foam. Safety of operation is dependent on proper ventilation.
Permissible exposure limits (PELs) require adequate mechanical ventilation in work areas to keep vapor concentrations below PELs. Remove all ignition sources in spray area, such as, pilot lights, open flames, cigarettes, static producing equipment, and more. Static sparks can be prevented by proper grounding of equipment and hoses. The fire extinguisher used for chemical fires should be easily accessible at all times. KAIWEI equipment is CE and ATEX certified, and complies with international safety standards for use in potentially explosive environments.
3. High-Pressure System Safety Procedures
The pressure of industrial polyurethane foam spray machines can be from 1000 PSI to 2000 PSI. One of the most serious injury hazards is high pressure fluid injection, which can result in injury to the skin (tissue damage, injury or amputation) if not treated immediately.
Operators must never point the spray gun at any part of the body, never place hands over the spray tip, and never attempt to stop leaks with hands or rags. All guns must have the trigger safety lock in place when not in use. Before every use, hoses, fittings and couplings must be inspected for wear and/or damage daily. KAIWEI equipment features several safety mechanisms, such as emergency stops and pressure relief valves, to reduce the risk to the operator.
4. Material Handling and Maintenance Safety
Isocyanates are moisture sensitive and may react with moisture to lead to pressure build-up, to release solid particles or damage equipment. Components A and B should be stored in separate containers, also sealed to avoid contamination.
Before any cleaning, inspection and/or maintenance activity, operators are required to follow the Pressure Relief Procedure to ensure the system is relieved of pressure and that there is no accidental injection. Cleaning solvents should be used in well-ventilated areas and spent (cleaned) solvent should be disposed of as per local regulations. KAIWEI offers full after-sales service, such as on-site troubleshooting and maintenance training, to guarantee the operation of the equipment is safe and reliable.
Conclusion
To operate an industrial polyurethane foam spray machine safely, stringent PPE and ventilation requirements, high pressure safety procedures and appropriate handling procedures must be followed. These safety guidelines are designed to reduce the risk and help operators to maintain a safe working environment. All our machinery at KAIWEI Technology Group is designed to ensure the safe operation of the equipment and conforms to international standards (CE, ATEX, ISO 9001:2015) ensuring high performance and safety levels. Join us to invest in equipment and training for safety and productivity.
